|
|
Fuselage |
|||||||||||||||||||||||||||
Page 16 |
|||||||||||||||||||||||||||
The gear was put on cinder blocks and leveled left to right. A stack of blocks were placed under the tail and the fuselage was leveled for and aft. Now back to work on the HS. |
|
|
|||||||||||||||||||||||||
The fresh air NACA ducts were positioned between uprights B & C. A hose will connect them to an eyeball outlet on the instrument panel. |
|
||||||||||||||||||||||||||
An inspection plate was put in between upright stations N & O. Holes were drilled in both the NACA ducts and the plate flanges. They were floxed in and clamped until cured. |
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
