|
|
Flight Controls |
|||||||||||||||||||||||||||
Page 4 |
|||||||||||||||||||||||||||
The aileron bellcrank and brackets were made from 1/8" aluminum. They were necked down to stay within the profile of the AS5048 airfoil. |
 |
|
|||||||||||||||||||||||||
The aileron controls will be operated by a pushrod system driven with a torque tube from the dual joysticks.. |
 |
||||||||||||||||||||||||||
The rudder pulleys will be mounted to the front face in the center of the main spar. This is because the rudder cables will be running down the center of the fuselage. The cross control needed for this setup will be between these pulleys and the rudder pedals. |
 |
||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
