|
|
Corvair Dual Electronic Ignition |
|||||||||||||||||||||||||||
Page 4 |
|||||||||||||||||||||||||||
Drill and grind the hump flat to prepare the brackets. |
|
|
|||||||||||||||||||||||||
I picked up some 8-32 stainless steel button head screws. Screw one into the old vacuum point plate and grind down to 3/16" length. Don't forget to chamfer the first thread. You will need a total of 7 screws for installation. |
|
||||||||||||||||||||||||||
Mount the point plate to the sub plate with the 3 holes from the bottom. The two sensor brackets get screwed on with the remaining 4 screws. All these screws can be loctite'd because they will not be moved for any adjustment. Don't forget the wire Ty-wrap |
|
||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
