|
|
Box Spars |
|||||||||||||||||||||||||||
Page 2 |
|||||||||||||||||||||||||||
This is my work space. I had to move all my tools out onto the porch every day that I was going to do some work on the spars. |
|
|
|||||||||||||||||||||||||
One of the main outer spars clamped and curing the T-88 epoxy. |
|
||||||||||||||||||||||||||
The outer main spar caps were tapered with a piece of MDF board with a UHMW strip attached to the bottom. That strip ran through the slot in the table saw top. The 2 x 4 on top was to stiffen the board. |
|
||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
